ENEC 301 Annex B

Ref. Standard Title Ref. to PD ENEC 303 Annex Limitation (ref PD ENEC 301 Annex A) Evaluation Factory Location (PD ENEC 308)
E1 EN IEC 60598-1:2021 Luminaires - Part 1: General requirements and tests Annex A Not for standalone ENEC certification
See notes for Item 1
1
E1 EN 60598-1:2015 Luminaires - Part 1: General requirements and tests Annex A Not for standalone ENEC certification
See notes for Item 1
1
E1.1 EN IEC 60598-2-1:2021 Fixed general purpose luminaires. Annex A no
1
E1.1 EN 60598-2-1:1989 Fixed general purpose luminaires. Annex A no
1
E1.2 EN 60598-2-2:2012 Luminaires - Part 2-2: Particular requirements - Recessed luminaires Annex A no
1
E1.3 EN 60598-2-3:2003 Luminaires for road and street lighting Annex A no
1
E1.4 EN 60598-2-4:2018 Portable general purpose luminaires Annex A no
1
E1.5 EN 60598-2-5:2015 Luminaires - Part 2-5: Particular requirements - Floodlights Annex A No
1
E1.8 EN 60598-2-8:2013 Luminaires - Part 2-8: Particular requirements - Handlamps Annex A no
1
E1.10 EN 60598-2-10:2003 Portable luminaires for children. Annex A no
1
E1.11 EN 60598-2-11:2013 Luminaires - Part 2-11: Particular requirements - Aquarium luminaires Annex A
1
E1.12 EN 60598-2-12:2013 Luminaires - Part 2-12: Particular requirements - Mains socket-outlet mounted nightlights Annex A no
1
E1.13 EN 60598-2-13:2006 Luminaires - Part 2-13: Particular requirements - Ground recessed luminaires Annex A no
1
E1.14 EN 60598-2-14:2009 Luminaires - Part 2-14: Particular requirements - Luminaires for cold cathode tubular discharge lamps (neon tubes) and similar equipment Annex A no
1
E1.17 EN IEC 60598-2-17:2018 Luminaires for stage lighting, television and film studios (outdoor and indoor) Annex A no
1
E1.18 EN 60598-2-18:1994 Luminaires - Part 2: Particular requirements - Section 18: Luminaires for swimming pools and similar applications Annex A no
1
E1.19 EN 60598-2-19:1989 Luminaires - Part 2: Particular requirements - Section 19: Air-handling luminaires (safety requirements) Annex A no
1
E1.20 EN 60598-2-20:2015 Luminaires - Part 2-20: Particular requirements - Lighting chains Annex B no
1
E1.21 EN 60598-2-21:2015 Luminaires - Part 2-21: Particular requirements - Rope lights Annex B
1
E1.22 EN IEC 60598-2-22:2022 60598-2-22:2014 specifies requirements for emergency luminaires for use with electrical lamps on emergency power supplies not exceeding 1 000 V. Annex B
See notes for Item 1.22
E1.22 EN 60598-2-22:2014 60598-2-22:2014 specifies requirements for emergency luminaires for use with electrical lamps on emergency power supplies not exceeding 1 000 V. Annex B
See notes for Item 1.22
1
E1.23 EN IEC 60598-2-23:2021 Luminaires - Part 2-23: Particular requirements - Extra-low-voltage lighting systems for ELV light sources Annex A no
1
E1.23 EN 60598-2-23:1996 Luminaires - Part 2-23: Particular requirements - Extra low-voltage lighting systems for filament lamps Annex A no
1
E1.24 EN 60598-2-24:2013 Luminaires - Part 2-24: Particular requirements - Luminaires with limited surface temperatures Supersedes EN 60598-2-24:1998 Annex A no
A
E1.25 EN 60598-2-25:1994 Luminaires - Part 2-25: Particular requirements - Luminaires for use in clinical areas of hospitals and health care buildings Annex A no
1
E2 EN IEC 62031:2020 LED modules for general lighting Annex AJ Not valid for Standalone ENEC certification. To be used ONLY in conjunction with EN 62471
1
E2 EN 62031:2008 LED modules for general lighting - Safety specifications Annex AJ Not valid for Standalone ENEC certification. To be used ONLY in conjunction with EN 62471
1
E7 EN 60155:1995 Glow-starters for fluorescent lamps Annex J no
1
E8 EN 61048:2006 Auxiliaries for lamps - Capacitors for use in tubular fluorescent and other discharge lamp circuits - General and safety requirements Annex N Not valid for Standalone ENEC certification. To be used ONLY in conjunction with EN 61049.
1
E8 EN 61049:1993 Capacitors for use in tubular fluorescent and other discharge lamp circuits - Performance requirements Annex N Not for ENEC standalone certification. To be used ONLY in conjunction with EN 61048.
1
E9 EN IEC 60238:2018 Edison screw lampholders Annex L
E10 EN 60400:2017 Lampholders for tubular fluorescent lamps and starterholders Annex L
E11 EN 60838-1:2017 Miscellaneous lampholders - Part 1: General requirements and tests Annex L no
1
E11.1 EN 60838-2-1:1996 Miscellaneous lampholders - Part 2: Particular requirements - Section 1: Lampholders S14 Annex L no
1
E11.2 EN 60838-2-2:2006 Miscellaneous lampholders - Part 2-2: Particular requirements - Connectors for LED-modules Annex L
1
E13 EN 61184:2017 Bayonet lampholders Annex L no
1
E15 EN 60570:2003 Electrical supply track systems for luminaires Annex S
See notes for Item 15
1
E17 EN 60968:2015 Self-ballasted fluorescent lamps for general lighting services - Safety requirements Annex R Not for ENEC standalone certification. To be used ONLY in conjunction with EN 60969.
1
E18 EN 61050:1992 Transformers for tubular discharge lamps having a no-load output voltage exceeding 1 kV (generally called neontransformers) - General and safety requirements Annex Q no
1
E19 EN IEC 61558-1:2019 Safety of transformers, reactors, power supply units and combinations thereof - Part 1: General requirements and tests Annex P no
2
E19.1 EN 61558-2-1:2007 Safety of power transformers, power supplies, reactors and similar products - Part 2-1: Particular requirements and tests for separating transformers and power supplies incorporating separating transformers for general applications NOTE: Group Safety Publication Annex P no
2
E19.2 EN 61558-2-2:2007 Safety of power transformers, power supplies, reactors and similar products - Part 2-2: Particular requirements and tests for control transformers and power supplies incorporating control transformers NOTE: Group Safety Publication Annex P no
2
E19.4 EN 61558-2-4:2009 Safety of transformers, reactors, power supply units and similar products for supply voltages up to 1 100 V - Part 2- 4: Particular requirements and tests for isolating transformers and power supply units incorporating isolating transformers NOTE: Group Safety Publication * To be read with EN 61558-1:2005 Annex P
2
E19.5 EN 61558-2-5:2010 Safety of transformers, reactors, power supply units and combinations thereof - Part 2-5: Particular requirements and tests for transformer for shavers, power supply units for shavers and shaver supply units Annex P no
2
E19.6 EN 61558-2-6:2009 Safety of transformers, reactors, power supply units and similar products for supply voltages up to 1 100 V - Part 2-6: Particular requirements and tests for safety isolating transformers and power supply units incorporating safety isolating transformers NOTE: Group Safety Publication * To be read with latest edition of EN 61558-1, based on EN 61588-12005. Annex P no
2
E19.7 EN 61558-2-7:2007 Safety of power transformers, power supply units and similar - Part 2-7: Particular requirements for transformers for toys NOTE: Group Safety Publication * To be used in conjunction with EN 61558-1:2005 + corrigendum August 2006 Annex P no
2
E19.8 EN 61558-2-8:2010 Safety of transformers, reactors, power supply units and combinations thereof - Part 2-8: Particular requirements and tests for transformers and power supply units for bells and chimes Annex P no
2
E19.16 EN 61558-2-16:2009 Safety of transformers, reactors, power supply units and similar products for supply voltages up to 1 100 V - Part 2-16: Particular requirements and tests for switch mode power supply units and transformers for switch mode power supply units NOTE: Group Safety Publication * To be read with latest edition of EN 61558-1, based on EN 61588-12005. Annex P no
2
E20 EN IEC 61058-1:2018 Switches for appliances - Part 1: General requirements Annex T No
2
E20 EN 61058-1-1:2016 Switches for appliances - Part 1-1: Requirements for mechanical switches Note: To be used in conjunction with EN 61058-1 Annex T No
2
E20 EN 61058-1-2:2016 Switches for appliances - Part 1-2: Requirements for electronic switches Note: To be used in conjunction with EN 61058-1 Annex T No
2
E20.1 EN IEC 61058-2-1:2021 Switches for appliances - Part 2-1: Particular requirements for cord switches Annex T no
2
E20.1 EN 61058-2-1:2011 Switches for appliances - Part 2-1: Particular requirements for cord switches Annex T no
2
E20.2 EN IEC 61058-2-5:2021 Switches for appliances - Part 2-5: Particular requirements for change-over selectors Annex T no
2
E20.2 EN 61058-2-5:2011 Switches for appliances - Part 2-5: Particular requirements for change-over selectors Annex T no
2
E21 EN 60730-1:1995 Automatic electrical controls for household and similar use - Part 1: General requirements NOTE: The parts 2 in the EN 60730 series are to be read in conjunction with the edition of EN 60730-1 indicated for the relevant part 2 and its amendments. * Corrigendum to EN issued August 2007 (d/e/f) Annex AB Not for standalone ENEC certification
See notes for Item 21
2
E21 EN 60730-1:2000 Automatic electrical controls for household and similar use - Part 1: General requirements NOTE: The parts 2 in the EN 60730 series are to be read in conjunction with the edition of EN 60730-1 indicated for the relevant part 2 and its amendments. * Corrigendum to EN issued August 2007 (English) * Superseded by EN 60730-1:2011 Annex AB Not for standalone ENEC certification
See notes for Item 21
2
E21 EN 60730-1:2011 Automatic electrical controls for household and similar use - Part 1: General requirements Annex AB Not for standalone ENEC certification
See notes for Item 21
2
E21 EN 60730-1:2016 Automatic electrical controls for household and similar use - Part 1: General requirements Annex AB Not for standalone ENEC certification
See notes for Item 21
2
E21.2 EN 60730-2-2:2002 Automatic electrical controls for household and similar use - Part 2-2: Particular requirements for thermal motor protectors NOTE: To be read with EN 60730-1:2000 Annex AB no
2
E21.3 EN 60730-2-3:2007 Automatic electrical controls for household and similar use - Part 2-3: Particular requirements for thermal protectors for ballasts for tubular fluorescent lamps Annex AB no
2
E21.4 EN 60730-2-4:2007 Automatic electrical controls for household and similar use - Part 2-4: Particular requirements for thermal motor protectors for motor-compressors of hermetic and semi-hermetic type Annex AB no
2
E21.5 EN 60730-2-5:2015 Automatic electrical controls - Part 2-5: Particular requirements for automatic electrical burner control systems Annex AB no
2
E21.6 EN 60730-2-6:2016 Automatic electrical controls for household and similar use - Part 2-6: Particular requirements for automatic electrical pressure sensing controls including mechanical requirements Annex AB no
2
E21.7 EN IEC 60730-2-7:2020 Automatic electrical controls - Part 2-7: Particular requirements for timers and time switches Annex AB no
2
E21.7 EN 60730-2-7:2010 Automatic electrical controls for household and similar use - Part 2-7: Particular requirements for timers and time switches Annex AB no
2
E21.8 EN IEC 60730-2-8:2020 Automatic electrical controls for household and similar use - Part 2-8: Particular requirements for electrically operated water valves, including mechanical requirements Annex AB no
2
E21.8 EN 60730-2-8:2002 Automatic electrical controls for household and similar use - Part 2: Particular requirements for electrically operated water valves, including mechanical requirements NOTE: To be read with EN 60730-1:1995 Annex AB no
2
E21.9 EN IEC 60730-2-9:2019 Automatic electrical controls - Part 2-9: Particular requirements for temperature sensing controls Annex AB
E21.10 EN 60730-2-10:2007 Automatic electrical controls for household and similar use - Part 2-10: Particular requirements for motor starting relays Annex AB no
2
E21.11 EN IEC 60730-2-11:2020 Automatic electrical controls - Part 2-11: Particular requirements for energy regulators Annex AB no
2
E21.11 EN 60730-2-11:2008 Automatic electrical controls for household and similar use - Part 2-11: Particular requirements for energy regulators Annex AB no
2
E21.12 EN IEC 60730-2-12:2019 Automatic electrical controls - Part 2-12: Particular requirements for electrically operated door locks Annex AB no
2
E21.13 EN IEC 60730-2-13:2018 Automatic electrical controls for household and similar use - Part 2-13: Particular requirements for humidity sensing controls Annex AB no
See notes for Item 33
2
E21.14 EN IEC 60730-2-14:2019 Automatic electrical controls - electric actuators Annex AB no
2
E21.15 EN IEC 60730-2-15:2019 Automatic electrical controls - Part 2-15: Particular requirements for automatic electrical air flow, water flow and water level sensing controls Annex AB no
2
E21.22 EN IEC 60730-2-22:2020 Automatic electrical controls - Part 2-22: Particular requirements for thermal motor protectors Annex AB no
2
E24 EN 60998-1:2004 Connecting devices for low-voltage circuits for household and similar purposes - Part 1: General requirements NOTE: Group Safety Publication Annex V
See notes for Item 24
1
E24.1 EN 60998-2-1:2004 Connecting devices for low-voltage circuits for household and similar purposes - Part 2-1: Particular requirements for connecting devices as separate entities with screw-type clamping units NOTE: Group Safety Publication * To be read with EN 60998-1:2004 Annex V
See notes for Item 24
1
E24.2 EN 60998-2-2:2004 Connecting devices for low-voltage circuits for household and similar purposes - Part 2-2: Particular requirements for connecting devices as separate entities with screwless-type clamping units NOTE: Group Safety Publication * To be read with EN 60998-1:2004 Annex V
See notes for Item 24
1
E24.3 EN 60998-2-3:2004 Connecting devices for low-voltage circuits for household and similar purposes - Part 2-3: Particular requirements for connecting devices as separate entities with insulation piercing clamping units NOTE: Group Safety Publication * To be read with EN 60998-1:1993 * Superseded by EN 60998-2-3:2004 Annex V
See notes for Item 24
1
E25 EN 60999-1:2000 Connecting devices - Electrical copper conductors - Safety requirements for screw-type and screwless-type clamping units - Part 1: General requirements and particular requirements for clamping units for conductors from 0,2 mm2 up to 35 mm2 (included) NOTE: Group Safety Publication Annex V
See notes for Item 25
1
E26 EN IEC 60938-2:2021 Fixed inductors for electromagnetic interference suppression - Part 2: Sectional specification on power line chokes Annex U no
1
E26 EN 60938-2:1999 Fixed inductors for electromagnetic interference suppression - Part 2: Sectional specification Annex U no
1
E27 EN 61347-1:2015 Lamp controlgear - Part 1: General and safety requirements Annex E Not for standalone ENEC certification
1
E27.1 EN 60927:2007 Auxiliaries for lamps - Starting devices (other than glow starters) - Performance requirements Annex I Not for ENEC standalone certification. To be used ONLY in conjunction with EN 61347-2-1.
1
E27.1 EN 61347-2-1:2001 Lamp controlgear - Starting devices (other than glow starters). Annex I Not for ENEC standalone certification. To be used ONLY in conjunction with EN 60927.
1
E27.2 EN 61047:2004 DC or AC supplied electronic step-down convertors for filament lamps - Performance requirements Annex H Not for ENEC standalone certification. To be used ONLY in conjunction with EN 61347-2-2.
1
E27.2 EN 61347-2-2:2012 Lamp controlgear - Part 2-2: Particular requirements for d.c. or a.c. supplied electronic step-down convertors for filament lamps Annex H Not for ENEC standalone certification. To be used ONLY in conjunction with EN 61047.
1
E27.3 EN 60929:2011 AC and/or DC-supplied electronic control gear for tubular fluorescent lamps - Performance requirements Annex F Not for ENEC standalone certification. To be used ONLY in conjunction with EN 61347-2-3.
1
E27.3 EN 61347-2-3:2011 Lamp control gear - Part 2-3: Particular requirements for a.c. and/or d.c. supplied electronic control gear for fluorescent lamps Annex F Not for ENEC standalone certification. To be used ONLY in conjunction with EN 60929.
1
E27.7 EN 61347-2-7:2012 Lamp controlgear - Part 2-7: Particular requirements for battery supplied electronic controlgear for emergency lighting (self-contained) Annex E no
1
E27.8 EN 60921:2004 Ballasts for tubular fluorescent lamps - Performance requirements Annex D Not for ENEC standalone certification. To be used ONLY in conjunction with EN 61347-2-8.
1
E27.8 EN 61347-2-8:2001 Lamp controlgear - Part 2-8: Particular requirements for ballasts for fluorescent lamps. Annex D Not for ENEC standalone certification. To be used ONLY in conjunction with EN 60921.
1
E27.9 EN 60923:2005 Auxiliaries for lamps - Ballasts for discharge lamps (excluding tubular fluorescent lamps) - Performance requirements Annex G Not for ENEC standalone certification. To be used ONLY in conjunction with EN 61347-2-9.
1
E27.9 EN 61347-2-9:2013 Lamp controlgear - Part 2-9: Particular requirements for electromagnetic controlgear for discharge lamps (excluding fluorescent lamps) Annex G Not for ENEC standalone certification. To be used ONLY in conjunction with EN 60923.
1
E27.10 EN 61347-2-10:2001 Lamp controlgear - Electronic invertors and convertors for high-frequency operation of cold start tubular discharge lamps (neon tubes). Annex AC no
1
E27.11 EN 61347-2-11:2001 Lamp controlgear - Miscellaneous electronic circuits used with luminaires. Annex AC no
1
E27.12 EN 61347-2-12:2005 Lamp controlgear - D.C. or A.C. Supplied electronic ballasts for discharge lamps (excluding fluorescent lamps). Annex AC no
1
E27.13 EN IEC 62384:2020 DC or AC supplied electronic controlgear for LED modules Annex AC Not for ENEC standalone certification. To be used ONLY in conjunction with EN 61347-2-13.
1
E27.13 EN 61347-2-13:2014 61347-2-13:2014 specifies particular safety requirements for electronic controlgear for use on d.c. or a.c. supplies up to 1 000 V (a.c. at 50 Hz or 60 Hz) and at an output frequency which can deviate from the supply frequency, associated with LED modules. Annex AC Not for ENEC standalone certification. To be used ONLY in conjunction with EN 62384.
1
E27.13 EN 62384:2006 DC or AC supplied electronic control gear for LED modules - Performance requirements Annex AC Not for ENEC standalone certification. To be used ONLY in conjunction with EN 61347-2-13.
1
E28 EN IEC 60320-1:2021 Appliance couplers for household and similar general purposes - Part 1: General requirements Annex W no
2
E28 EN 60320-1:2015 Appliance couplers for household and similar general purposes - Part 1: General requirements. Annex W no
2
E28 EN 60320-3:2014 Appliance couplers for household and similar general purposes - Part 3: Standard sheets and gauges Annex W no
2
E28.1 EN IEC 60320-2-1:2021 Appliance couplers for household and similar general purposes - Part 2-1: Sewing machine couplers Annex W no
2
E28.1 EN 60320-2-1:2000 Appliance couplers for household and similar general purposes - Part 2-1: Sewing machine couplers Annex W no
2
E28.3 EN IEC 60320-2-3:2021 Appliance couplers for household and similar general purposes - Part 2-3: Appliance couplers with a degree of protection higher than IPX0 Annex W no
2
E28.3 EN 60320-2-3:1998 Appliance couplers for household and similar general purposes - Part 2-3: Appliance coupler with a degree of protection higher than IPX0 Annex W no
2
E28.4 EN IEC 60320-2-4:2021 Appliance couplers for household and similar general purposes - Part 2-4: Couplers dependent on appliance weight for engagement Annex W no
2
E28.4 EN 60320-2-4:2006 Appliance couplers for household and similar general purposes - Part 2-4: Appliance couplers dependent on appliance weight for engagement Annex W no
2
E29 EN 50075:1990 Flat non-rewirable two-pole plugs, 2,5 A 250 V, with cord, for the connection of class II-equipment for household and similar purposes Annex X
See notes for Item 29
2
E30.1 EN IEC 60309-1:2022 Plugs, fixed or portable socket-outlets and appliance inlets for industrial purposes - Part 1: General requirements Annex Y Not for standalone ENEC certification
2
E30.1 EN 60309-1:1999 Plugs, socket-outlets and couplers for industrial purposes - Part 1: General requirements Annex Y Not for standalone ENEC certification
2
E30.2 EN IEC 60309-2:2022 Plugs, fixed or portable socket-outlets and appliance inlets for industrial purposes - Part 2: Dimensional compatibility requirements for pin and contact-tube accessories Annex Y no
2
E30.2 EN 60309-2:1999 Plugs, socket-outlets and couplers for industrial purposes - Part 2: Dimensional interchangeability requirements for pin and contact-tube accessories Annex Y no
2
E30.4 EN IEC 60309-4:2022 Plugs, fixed or portable socket-outlets and appliance inlets for industrial purposes - Part 4: Switched socket-outlets with or without interlock Annex Y no
2
E30.4 EN 60309-4:2007 Plugs, socket-outlets and couplers for industrial purposes - Part 4: Switched socket-outlets and connectors with or without interlock Annex Y no
2
E31 EN 60384-14:2013 Fixed capacitors for use in electronic equipment - Part 14: Sectional specification - Fixed capacitors for electromagnetic interference suppression and connection to the supply mains Annex U no
2
E32.1 EN 60939-2:2005 Passive filter units for electromagnetic interference suppression - Part 2: Sectional specification: Passive filter units for which safety tests are appropriate - Test methods and general requirements. Annex U no
2
E32.2 EN 60939-3:2015 Passive filter units for electromagnetic interference suppression - Part 3: Passive filter units for which safety tests are appropriate Annex U
2
E33 EN 60335-1:1994 Safety of household and similar electrical appliances - Part 1: General requirements NOTE: The parts 2 in the EN 60335 series are to be read in conjunction with the edition of EN 60335-1 indicated for the relevant part 2. Annex AD Not for standalone ENEC certification
See notes for Item 33
2
E33 EN 60335-1:2002 Household and similar electrical appliances - Safety - Part 1: General requirements NOTE: The parts 2 in the EN 60335 series are to be read in conjunction with the edition of EN 60335-1 indicated for the relevant part 2. Annex AD Not for standalone ENEC certification
See notes for Item 33
2
E33 EN 60335-1:2012 Household and similar electrical appliances - Safety - Part 1: General requirements Annex AD Not for standalone ENEC certification
See notes for Item 33
2
E33.2 EN 60335-2-2:2010 Vacuum cleaners and water-suction cleaning appliances. Annex AD
See notes for Item 33
2
E33.3 EN 60335-2-3:2016 Household and similar electrical appliances - Safety - Part 2-3: Particular requirements for electric irons NOTE: To be read with EN 60335-1:2002 Annex AD
See notes for Item 33
2
E33.4 EN 60335-2-4:2010 Household and similar electrical appliances - Safety - Part 2-4: Particular requirements for spin extractors Annex AD
See notes for Item 33
2
E33.5 EN 60335-2-5:2015 Household and similar electrical appliances - Safety - Part 2-5: Particular requirements for dishwashers Annex AD
See notes for Item 33
2
E33.6 EN 60335-2-6:2015 Household and similar electrical appliances - Safety - Part 2-6: Particular requirements for stationary cooking ranges, hobs, ovens and similar appliances Annex AD
See notes for Item 33
2
E33.7 EN 60335-2-7:2010 Household and similar electrical appliances - Safety - Part 2-7: Particular requirements for washing machines Annex AD
See notes for Item 33
2
E33.8 EN 60335-2-8:2015 Household and similar electrical appliances - Safety - Part 2-8: Particular requirements for shavers, hair clippers and similar appliances Annex AD
See notes for Item 33
2
E33.9 EN 60335-2-9:2003 Household and similar electrical appliances - Safety - Part 2-9: Particular requirements for grills, toasters and similar portable cooking appliances NOTE: To be read with EN 60335-1:2002 Annex AD
See notes for Item 33
2
E33.10 EN 60335-2-10:2003 Household and similar electrical appliances - Safety - Part 2-10: Particular requirements for floor treatment machines and wet scrubbing machines NOTE: To be read with EN 60335-1:2002 Annex AD
See notes for Item 33
2
E33.11 EN IEC 60335-2-11:2022 Household and similar electrical appliances - Safety - Part 2-11: Particular requirements for tumble dryers Annex AD
See notes for Item 33
2
E33.11 EN 60335-2-11:2010 Household and similar electrical appliances - Safety - Part 2-11: Particular requirements for tumble dryers Annex AD
See notes for Item 33
2
E33.12 EN 60335-2-12:2003 Household and similar electrical appliances - Safety - Part 2-12: Particular requirements for warming plates and similar appliances NOTE: To be read with EN 60335-1:2002 Annex AD
See notes for Item 33
2
E33.13 EN 60335-2-13:2010 Household and similar electrical appliances - Safety - Part 2-13: Particular requirements for deep fat fryers, frying pans and similar appliances Annex AD
See notes for Item 33
2
E33.14 EN 60335-2-14:2006 Household and similar electrical appliances - Safety - Part 2-14: Particular requirements for kitchen machines NOTE: To be read with EN 60335-1:2002 Annex AD
See notes for Item 33
2
E33.15 EN 60335-2-15:2016 Household and similar electrical appliances - Safety - Part 2-15: Particular requirements for appliances for heating liquids NOTE: To be read with EN 60335-1:2012 Annex AD
See notes for Item 33
2
E33.16 EN 60335-2-16:2003 Household and similar electrical appliances - Safety - Part 2-16: Particular requirements for food waste disposers NOTE: To be read with EN 60335-1:2002 Annex AD
See notes for Item 33
2
E33.17 EN 60335-2-17:2013 Household and similar electrical appliances - Safety - Part 2-17: Particular requirements for blankets, pads, clothing and similar flexible heating appliances Annex AD
See notes for Item 33
2
E33.21 EN 60335-2-21:2003 Storage water heaters. Annex AD
See notes for Item 33
2
E33.21 EN 60335-2-21:2021 Household and similar electrical appliances - Safety - Part 2-21: Particular requirements for storage water heaters Annex AD
See notes for Item 33
2
E33.23 EN 60335-2-23:2003 Household and similar electrical appliances - Safety - Part 2-23: Particular requirements for appliances for skin or hair care NOTE: To be read with EN 60335-1:2002 Annex AD
See notes for Item 33
2
E33.24 EN 60335-2-24:2010 Refrigerating appliances, ice-cream appliances and ice-makers. Annex AD
See notes for Item 33
2
E33.25 EN IEC 60335-2-25:2021 Household and similar electrical appliances - Safety - Part 2-25: Particular requirements for microwave ovens, including combination microwave ovens Annex AD
See notes for Item 33
2
E33.25 EN 60335-2-25:2012 Household and similar electrical appliances - Safety - Part 2-25: Particular requirements for microwave ovens, including combination microwave ovens Annex AD
See notes for Item 33
2
E33.26 EN 60335-2-26:2003 Household and similar electrical appliances - Safety - Part 2-26: Particular requirements for clocks NOTE: To be read with EN 60335-1:2002 Annex AD
See notes for Item 33
2
E33.27 EN 60335-2-27:2013 Household and similar electrical appliances - Safety - Part 2-27: Particular requirements for appliances for skin exposure to ultraviolet and infrared radiation Supersedes EN 60335-2-27:2010 Annex AD
See notes for Item 33
2
E33.28 EN 60335-2-28:2003 Household and similar electrical appliances - Safety - Part 2-28: Particular requirements for sewing machines NOTE: To be read with EN 60335-1:2002 Annex AD
See notes for Item 33
2
E33.29 EN 60335-2-29:2004 Safety of household and similar electrical appliances - Part 2-29: Particular requirements for battery chargers NOTE: To be read with EN 60335-1:2002 Annex AD
See notes for Item 33
2
E33.29 EN 60335-2-29:2021 Household and similar electrical appliances - Safety - Part 2-29: Particular requirements for battery chargers Annex AD
See notes for Item 33
2
E33.30 EN 60335-2-30:2009 Household and similar electrical appliances - Safety - Part 2-30: Particular requirements for room heaters NOTE: To be read with EN 60335-1:2002 Annex AD
See notes for Item 33
2
E33.31 EN 60335-2-31:2014 60335-2-31 deals with the safety of electric range hoods and other cooking fume extractors intended for installing above, beside, behind or under household cooking ranges, hobs and similar cooking appliances, their rated voltage being not more than 250 V. Annex AD
See notes for Item 33
2
E33.32 EN IEC 60335-2-32:2021 Household and similar electrical appliances - Safety - Part 2-32: Particular requirements for massage appliances Annex AD
See notes for Item 33
2
E33.32 EN 60335-2-32:2003 Household and similar electrical appliances - Safety - Part 2-32: Particular requirements for massage appliances NOTE: To be read with EN 60335-1:2002 Annex AD
See notes for Item 33
2
E33.34 EN 60335-2-34:2013 Household and similar electrical appliances - Safety - Part 2-34: Particular requirements for motor-compressors Annex AD
See notes for Item 33
2
E33.35 EN 60335-2-35:2016 Household and similar electrical appliances - instantaneous water heaters Annex AD
2
E33.36 EN 60335-2-36:2002 Household and similar electrical appliances - Safety - Part 2-36: Particular requirements for commercial electric cooking ranges, ovens, hobs and hob elements NOTE: To be read with EN 60335-1:2002 Annex AD
See notes for Item 33
2
E33.37 EN 60335-2-37:2002 Household and similar electrical appliances - Safety - Part 2-37: Particular requirements for commercial electric deep fat fryers NOTE: To be read with EN 60335-1:2002 Annex AD
See notes for Item 33
2
E33.38 EN 60335-2-38:2003 Household and similar electrical appliances - Safety - Part 2-38: Particular requirements for commercial electric griddles and griddle grills NOTE: To be read with EN 60335-1:2002 Annex AD
See notes for Item 33
2
E33.39 EN 60335-2-39:2003 Household and similar electrical appliances - Safety - Part 2-39: Particular requirements for commercial electric multi-purpose cooking pans NOTE: To be read with EN 60335-1:2002 Annex AD
See notes for Item 33
2
E33.40 EN 60335-2-40:2003 Household and similar electrical appliances - Safety - Part 2-40: Particular requirements for electrical heat pumps, air-conditioners and dehumidifiers Annex AD
See notes for Item 33
2
E33.41 EN IEC 60335-2-41:2021 Household and similar electrical appliances - Safety - Particular requirements for pumps Annex AD
See notes for Item 33
2
E33.41 EN 60335-2-41:2003 Household and similar electrical appliances - Safety - Part 2-41: Particular requirements for pumps NOTE: To be read with EN 60335-1:2002 Annex AD
See notes for Item 33
2
E33.42 EN 60335-2-42:2003 Household and similar electrical appliances - Safety - Part 2-42: Particular requirements for commercial electric forced convection ovens, steam cookers and steam-convection ovens NOTE: To be read with EN 60335-1:2002 Annex AD
See notes for Item 33
2
E33.43 EN IEC 60335-2-43:2020 Household and similar electrical appliances - Safety - Part 2-43:Particular requirements for clothes dryers and towel rails Annex AD
See notes for Item 33
2
E33.43 EN 60335-2-43:2003 Household and similar electrical appliances - Safety - Part 2-43: Particular requirements for clothes dryers and towel rails NOTE: To be read with EN 60335-1:2002 Annex AD
See notes for Item 33
2
E33.44 EN 60335-2-44:2002 Household and similar electrical appliances - Safety - Part 2-44: Particular requirements for ironers NOTE: To be read with EN 60335-1:2002 Annex AD
See notes for Item 33
2
E33.45 EN 60335-2-45:2002 Household and similar electrical appliances - Safety - Part 2-45: Particular requirements for portable heating tools and similar appliances NOTE: To be read with EN 60335-1:2002 Annex AD
See notes for Item 33
2
E33.47 EN 60335-2-47:2003 Household and similar electrical appliances - boiling pans NOTE: To be read with EN 60335-1:2002 Annex AD
See notes for Item 33
2
E33.48 EN 60335-2-48:2003 Household and similar electrical applicances - Safety - Part 2-48: Particular requirements for commercial grillers and toasters NOTE: To be read with EN 60335-1:2002 Annex AD
See notes for Item 33
2
E33.49 EN 60335-2-49:2003 Household and similar electrical appliances - Safety - Part 2-49: Particular requirements for commercial electric hot cupboards NOTE: To be read with EN 60335-1:2002 Annex AD
See notes for Item 33
2
E33.50 EN 60335-2-50:2003 Household and similar electrical appliances - Safety - Part 2-50: Particular requirements for commercial electric bains-marie NOTE: To be read with EN 60335-1:2002 Annex AD
See notes for Item 33
2
E33.51 EN 60335-2-51:2003 Household and similar electrical appliances - Safety - Part 2-51: Particular requirements for stationary circulation pumps for heating and service water installations NOTE: To be read with EN 60335-1:2002 Annex AD
See notes for Item 33
2
E33.52 EN 60335-2-52:2003 Household and similar electrical appliances - Safety - Part 2-52: Particular requirements for oral hygiene appliances NOTE: To be read with EN 60335-1:2002 Annex AD
See notes for Item 33
2
E33.53 EN 60335-2-53:2011 Household and similar electrical appliances - Safety - Part 2-53: Particular requirements for sauna heating appliances and infrared cabins Annex AD
See notes for Item 33
2
E33.54 EN 60335-2-54:2008 Household and similar electrical appliances - Safety - Part 2-54: Particular requirements for surface-cleaning appliances for household use employing liquids or steam Annex AD
See notes for Item 33
2
E33.55 EN 60335-2-55:2003 Household and similar electrical appliances - Safety - Part 2-55: Particular requirements for electrical appliances for use with aquariums and garden ponds NOTE: To be read with EN 60335-1:2002 Annex AD
See notes for Item 33
2
E33.56 EN 60335-2-56:2003 Household and similar electrical appliances - Safety - Part 2-56: Particular requirements for projectors and similar appliances NOTE: To be read with EN 60335-1:2002 Annex AD
See notes for Item 33
2
E33.58 EN 60335-2-58:2005 Safety of household and similar electrical appliances - Part 2-58: Particular requirements for commercial electric dishwashing machines NOTE: To be read with EN 60335-1:2002 Annex AD
See notes for Item 33
2
E33.59 EN 60335-2-59:2003 Household and similar electrical appliances - Safety - Part 2-59: Particular requirements for insect killers NOTE: To be read with EN 60335-1:2002 Annex AD
See notes for Item 33
2
E33.60 EN 60335-2-60:2003 Household and similar electrical appliances - Safety - Part 2-60: Particular requirements for whirlpool baths and whirlpool spas NOTE: To be read with EN 60335-1:2002 Annex AD
See notes for Item 33
2
E33.61 EN 60335-2-61:2003 Household and similar electrical appliances - Safety - Part 2-61: Particular requirements for thermal-storage room heaters NOTE: To be read with EN 60335-1:2002 Annex AD
See notes for Item 33
2
E33.62 EN IEC 60335-2-62:2022 Household and similar electrical appliances - Safety - Part 2-62: Particular requirements for commercial electric rinsing sinks Annex AD
See notes for Item 33
2
E33.62 EN 60335-2-62:2003 Household and similar electrical appliances - Safety - Part 2-62: Particular requirements for commercial electric rinsing sinks NOTE: To be read with EN 60335-1:2002 Annex AD
See notes for Item 33
2
E33.64 EN 60335-2-64:2000 Safety of household and similar electrical appliances - Part 2-64: Particular requirements for commercial electric kitchen machines NOTE: To be read with EN 60335-1:1994 Annex AD
See notes for Item 33
2
E33.65 EN 60335-2-65:2003 Household and similar electrical appliances - Safety - Part 2-65: Particular requirements for air-cleaning appliances NOTE: To be read with EN 60335-1:2002 Annex AD
See notes for Item 33
2
E33.66 EN 60335-2-66:2003 Household and similar electrical appliances - Safety - Part 2-66: Particular requirements for water-bed heaters NOTE: To be read with EN 60335-1:2002 Annex AD
See notes for Item 33
2
E33.67 EN 60335-2-67:2012 Household and similar electrical appliances - Safety - Part 2-67: Particular requirements for floor treatment machines for commercial use Annex AD
See notes for Item 33
1
E33.68 EN 60335-2-68:2012 Household and similar electrical appliances - Safety - Part 2-68: Particular requirements for spray extraction machines, for commercial use ANNEX AD
See notes for Item 33
2
E33.69 EN 60335-2-69:2012 Household and similar electrical appliances - Safety - Part 2-69: Particular requirements for wet and dry vacuum cleaners, including power brush for commercial use Annex AD
See notes for Item 33
2
E33.70 EN 60335-2-70:2002 Household and similar electrical appliances - Safety - Part 2-70: Particular requirements for milking machines NOTE: To be read with EN 60335-1:2002 Annex AD
See notes for Item 33
2
E33.71 EN IEC 60335-2-71:2020 Household and similar electrical appliances - Safety - Part 2-71: Particular requirements for electrical heating appliances for breeding and rearing animals Annex AD
See notes for Item 33
2
E33.71 EN 60335-2-71:2003 Household and similar electrical appliances - Safety - Part 2-71: Particular requirements for electrical heating appliances for breeding and rearing animals NOTE: To be read with EN 60335-1:2002 Annex AD
See notes for Item 33
2
E33.72 EN 60335-2-72:2012 Household and similar electrical appliances - Safety - Part 2-72: Particular requirements for floor treatment machines with or without traction drive, for commercial use Annex AD
See notes for Item 33
2
E33.73 EN 60335-2-73:2003 Household and similar electrical appliances - Safety - Part 2-73: Particular requirements for fixed immersion heaters NOTE: To be read with EN 60335-1:2002 Annex AD
See notes for Item 33
2
E33.74 EN 60335-2-74:2003 Household and similar electrical appliances - Safety - Part 2-74: Particular requirements for portable immersion heaters NOTE: To be read with EN 60335-1:2002 Annex AD
See notes for Item 33
2
E33.75 EN 60335-2-75:2004 Safety of household and similar electrical appliances - Part 2-75: Particular requirements for commercial dispensing appliances and vending machines (electric or gas-heated) NOTE: To be read with EN 60335-1:2002 Annex AD
See notes for Item 33
2
E33.76 EN IEC 60335-2-76:2021 Particular requirements for electric fence energizers Annex AD
See notes for Item 33
2
E33.76 EN 60335-2-76:2005 Household and similar electrical appliances - Safety - Part 2-76: Particular requirements for electric fence energizers Annex AD
See notes for Item 33
2
E33.77 EN 60335-2-77:2010 Safety of household and similar appliances - Part 2-77: Particular requirements for pedestrian-controlled walk-behind electrically powered lawn mowers Annex AD
See notes for Item 33
2
E33.78 EN 60335-2-78:2003 Household and similar electrical appliances - Safety - Part 2-78: Particular requirements for outdoor barbecues NOTE: To be read with EN 60335-1:2002 Annex AD
See notes for Item 33
2
E33.79 EN 60335-2-79:2012 Household and similar electrical appliances - Safety - Part 2-79: Particular requirements for high pressure cleaners and steam cleaners Annex AD
See notes for Item 33
2
E33.80 EN 60335-2-80:2003 Household and similar electrical appliances - Safety - Part 2-80: Particular requirements for fans NOTE: To be read with EN 60335-1:2002 Annex AD
See notes for Item 33
2
E33.81 EN 60335-2-81:2003 Household and similar electrical appliances - Safety - Part 2-81: Particular requirements for foot warmers and heating mats NOTE: To be read with EN 60335-1:2002 Annex AD
See notes for Item 33
2
E33.82 EN IEC 60335-2-82:2022 Particular requirements for amusement machines and personal service machines NOTE: To be read with EN 60335-1:2010 Annex AD
See notes for Item 33
2
E33.82 EN 60335-2-82:2003 Household and similar electrical appliances - Safety - Part 2-82: Particular requirements for amusement machines and personal service machines NOTE: To be read with EN 60335-1:2002 Annex AD
See notes for Item 33
2
E33.83 EN 60335-2-83:2002 Heated gullies for roof drainage, Household and similar electrical appliances - Safety - Part 2-83: Particular requirements for heated gullies for roof drainage NOTE: To be read with EN 60335-1:2002 Annex AD
See notes for Item 33
2
E33.84 EN IEC 60335-2-84:2021 Household and similar electrical appliances - Safety - Part 2-84: Particular requirements for toilet appliances Annex AD
See notes for Item 33
2
E33.84 EN 60335-2-84:2003 Household and similar electrical appliances - Safety - Part 2-84: Particular requirements for toilets Annex AD
See notes for Item 33
2
E33.85 EN 60335-2-85:2003 Household and similar electrical appliances - Safety - Part 2-85: Particular requirements for fabric steamers NOTE: To be read with EN 60335-1:2002 Annex AD
See notes for Item 33
2
E33.86 EN 60335-2-86:2003 Safety of household and similar electrical appliances - Part 2-86: Particular requirements for electric fishing machines NOTE: To be read with EN 60335-1:2002 Annex AD
See notes for Item 33
2
E33.87 EN IEC 60335-2-87:2020 Household and similar electrical appliances - Safety - Part 2-87: Particular requirements for electrical animal-stunning equipment Annex AD
See notes for Item 33
2
E33.87 EN 60335-2-87:2002 Household and similar electrical appliances - Safety - Part 2-87: Particular requirements for electrical animalstunning equipment NOTE: To be read with EN 60335-1:2002 Annex AD
See notes for Item 33
2
E33.88 EN 60335-2-88:2002 Household and similar electrical appliances - Safety - Part 2-88: Particular requirements for humidifiers intended for use with heating, ventilation, or air-conditioning systems NOTE: To be read with EN 60335-1:2002 Annex AD
See notes for Item 33
2
E33.89 EN 60335-2-89:2010 Household and similar electrical appliances - Safety - Part 2-89: Particular requirements for commercial refrigerating appliances with an incorporated or remote refrigerant condensing unit or compressor Annex AD
See notes for Item 33
2
E33.90 EN IEC 60335-2-90:2021 NOTE: To be read with EN 60335-1:2002 Annex AD
See notes for Item 33
2
E33.90 EN 60335-2-90:2006 Household and similar electrical appliances - Safety - Part 2-90: Particular requirements for commercial microwave ovens NOTE: To be read with EN 60335-1:2002 Annex AD
See notes for Item 33
2
E33.91 EN 50636-2-91:2014 Household and similar electrical appliances - Safety - Part 2-91: Particular requirements for walk-behind and hand-held lawn trimmers and lawn edge trimmers Annex AD
See notes for Item 33
2
E33.92 EN 50636-2-92:2014 Household and similar electrical appliances - Safety - Part 2-92: Particular requirements for pedestrian-controlled mains-operated lawn scarifiers and aerators Annex AD
See notes for Item 33
2
E33.95 EN 60335-2-95:2015 Household and similar electrical appliances - Safety - Part 2-95: Particular requirements for drives for vertically moving garage doors for residential use Annex AD
See notes for Item 33
2
E33.96 EN IEC 60335-2-96:2021 NOTE: To be read with EN 60335-1:2002 Annex AD
See notes for Item 33
2
E33.96 EN 60335-2-96:2002 Household and similar electrical appliances - Safety - Part 2-96: Particular requirements for flexible sheet heating elements for room heating NOTE: To be read with EN 60335-1:2002 Annex AD
See notes for Item 33
2
E33.97 EN 60335-2-97:2006 Household and similar electrical appliances - Safety - Part 2-97: Particular requirements for drives for rolling shutters, awnings, blinds and similar equipment NOTE: to be read with EN 60335-1:2002 Annex AD
See notes for Item 33
2
E33.98 EN 60335-2-98:2003 Household and similar electrical appliances - Safety - Part 2-98: Particular requirements for humidifiers NOTE: To be read with EN 60335-1:2002 Annex AD
See notes for Item 33
2
E33.99 EN 60335-2-99:2003 Household and similar electrical appliances - Safety - Part 2-99: Particular requirements for commercial electric hoods NOTE: To be read with EN 60335-1:2002 Annex AD
See notes for Item 33
2
E33.101 EN 60335-2-101:2002 Household and similar electrical appliances - Safety - Part 2-101: Particular requirements for vaporizers NOTE: To be read with EN 60335-1:2002 Annex AD
See notes for Item 33
2
E33.102 EN 60335-2-102:2016 Household and similar electrical appliances - gas, oil and solid-fuel burning appliances having electrical connections Annex AD
See notes for Item 33
2
E33.103 EN 60335-2-103:2015 Household and similar electrical appliances - Safety - Part 2-103: Particular requirements for drives for gates, doors and windows Annex AD
See notes for Item 33
2
E33.105 EN IEC 60335-2-105:2021 Household and similar electrical appliances - Safety - Part 2-105: Particular requirements for multifunctional shower cabinets Annex AD
See notes for Item 33
2
E33.105 EN 60335-2-105:2005 Household and similar electrical appliances - Part 2-105: Particular requirements for multifunctional shower cabinets Annex AD
See notes for Item 33
2
E33.106 EN 60335-2-106:2007 Household and similar electrical appliances - Part 2-106: Particular requirements for heated carpets and for heating units for room heating installed under removable floor coverings Annex AD
See notes for Item 33
2
E33.108 EN 60335-2-108:2008 Household and similar electrical appliances - Part 2-108: Particular requirements for electrolysers Annex AD
See notes for Item 33
2
E35 EN 60825-1:2014 60825-1:2014 is applicable to safety of laser products emitting laser radiation in the wavelength range 180 nm to 1 mm. Annex AA no
2
E36 EN 61210:2010 Connecting devices - Flat quick-connect terminations for electrical copper conductors - Safety requirements Annex AE no
2
E37 EN 60745-1:2006 Hand-held motor-operated electric tools - Safety - Part 1: General requirements NOTE: Superseded by EN 60745-1:2009 * The parts 2 in the EN 60745 series are to be read in conjunction with the edition of EN 60745-1 indicated for the relevant part 2. Annex AF Not for standalone ENEC certification
2
E37 EN 60745-1:2009 Hand-held motor-operated electric tools - Safety - Part 1: General requirements Annex AF Not for standalone ENEC certification
2
E37 EN 62841-1:2015 Electric motor-operated hand-held tools, transportable tools and lawn and garden machinery - Safety - Part 1: General requirements Annex AF Not for standalone ENEC certification
2
E37.1 EN 62841-2-1:2018 Electric motor-operated hand-held tools, transportable tools and lawn and garden machinery - Safety - Part 2-1: Particular requirements for hand-held drills and impact drills Annex AF no
2
E37.2 EN 62841-2-2:2014 Electric motor-operated hand-held tools, transportable tools and lawn and garden machinery - Safety - Part 2-2: Particular requirements for hand-held screwdrivers and impact wrenches (IEC 62841-2-2:2014, modified) Annex AF no
2
E37.3 EN IEC 62841-2-3:2021 Electric motor-operated hand-held tools, transportable tools and lawn and garden machinery - Safety - Part 2-3: Particular requirements for hand-held grinders, disc-type polishers and disc-type sanders Annex AF no
2
E37.3 EN 60745-2-3:2011 Hand-held motor-operated electric tools - Safety - Part 2-3: Particular requirements for grinders, polishers and disk-type sanders Annex AF no
2
E37.4 EN 62841-2-4:2014 Electric motor-operated hand-held tools, transportable tools and lawn and garden machinery - Safety - Part 2-4: Particular requirements for hand-held sanders and polishers other than disc type (IEC 62841-2-4:2014, modified) Annex AF no
2
E37.5 EN 62841-2-5:2014 Electric motor-operated hand-held tools, transportable tools and lawn and garden machinery - Safety - Part 2-5: Particular requirements for hand-held circular saws (IEC 62841-2-5:2014, modified) Annex AF no
2
E37.6 EN IEC 62841-2-6:2020 Electric motor-operated hand-held tools, transportable tools and lawn and garden machinery - Safety - Part 2-6: Particular requirements for hand-held hammers Annex AF no
2
E37.6 EN 60745-2-6:2010 Hand-held motor-operated electric tools - Safety - Part 2-6: Particular requirements for hammers Annex AF no
2
E37.8 EN 62841-2-8:2016 Electric motor-operated hand-held tools, transportable tools and lawn and garden machinery - Safety - Part 2-8: Particular requirements for hand-held shears and nibblers Annex AF no
2
E37.9 EN 62841-2-9:2015 Electric motor-operated hand-held tools, transportable tools and lawn and garden machinery - Safety - Part 2-9: Particular requirements for hand-held tappers and threaders Annex AF
2
E37.11 EN 62841-2-11:2016 Electric motor-operated hand-held tools, transportable tools and lawn and garden machinery - Safety - Part 2-11: Particular requirements for hand-held reciprocating saws Annex AF no
2
E37.12 EN 60745-2-12:2009 Hand-held motor-operated electric tools - Safety - Part 2-12: Particular requirements for concrete vibrators NOTE: To be read with EN 60745-1:2009 Annex AF no
2
E37.13 EN 60745-2-13:2009 Hand-held motor-operated electric tools - Safety - Part 2-12: Particular requirements for planers? NOTE: To be read with EN 60745-1:2009 Annex AF no
2
E37.13 EN 62841-4-1:2020 Electric Motor-Operated Hand-Held Tools, Transportable Tools and Lawn and Garden Machinery - Safety - Part 4-1: Particular requirements for chain saws Annex AF no
2
E37.14 EN 62841-2-14:2015 Electric motor-operated hand-held tools, transportable tools and lawn and garden machinery - Safety - Part 2-14: Particular requirements for hand-held planers Annex AF no
2
E37.15 EN 60745-2-15:2009 Hand-held motor-operated electric tools - Safety - Part 2-14: Particular requirements for hedge trimmers? Annex AF no
2
E37.15 EN 62841-4-2:2019 Electric motor-operated hand-held tools, transportable tools and lawn and garden machinery - Safety - Part 4-2: Particular requirements for hedge trimmers Annex AF
2
E37.17 EN 62841-2-17:2017 Electric motor-operated hand-held tools, transportable tools and lawn and garden machinery - Safety - Part 2-17: Particular requirements for hand-held routers Annex AF
2
E37.18 EN 60745-2-18:2009 Hand-held motor-operated electric tools - Safety - Part 2-18: Particular requirements for strapping tools Annex AF no
2
E37.19 EN 60745-2-19:2009 Hand-held motor-operated electric tools - Safety - Part 2-19: Particular requirements for jointers Annex AF no
2
E37.20 EN 60745-2-20:2009 Hand-held motor-operated electric tools - Safety - Part 2-20: Particular requirements for band saws Annex AF no
2
E37.21 EN 60745-2-21:2009 Hand-held motor-operated electric tools - Safety - Part 2-21: Particular requirements for drain cleaners NOTE: To be read with EN 60745-1:2009 Annex AF no
2
E37.21 EN 62841-2-21:2019 Electric motor-operated hand-held tools, transportable tools and lawn and garden machinery - Safety - Part 2-21: Particular requirements for hand-held drain cleaners Annex AF no
2
E37.22 EN 60745-2-22:2011 Hand-held motor-operated electric tools - Safety - Part 2-22: Particular requirements for cut-off machines Annex AF
2
E38 EN 61029-1:2000 Safety of transportable motor-operated electric tools - Part 1: General requirements NOTE: Superseded by EN 61029-1:2009 Annex AG Not for standalone ENEC certification
2
E38 EN 61029-1:2009 Safety of transportable motor-operated electric tools - Part 1: General requirements Annex AG Not for standalone ENEC certification
2
E38.1 EN 62841-3-1:2014 Electric motor-operated hand-held tools, transportable tools and lawn and garden machinery - Safety - Part 3-1: Particular requirements for transportable table saws (IEC 62841-3-1:2014, modified) Annex AG no
2
E38.4 EN 62841-3-4:2016 Electric motor-operated hand-held tools, transportable tools and lawn and garden machinery - Safety - Part 3-4: Particular requirements for transportable bench grinders Annex AG no
2
E38.5 EN 61029-2-5:2011 Safety of transportable motor-operated electric tools - Part 2-5: Particular requirements for band saws Annex AG no
2
E38.8 EN 61029-2-8:2010 Safety of transportable motor-operated electric tools - Part 2-8: Particular requirements for single spindle vertical moulders Annex AG no
2
E38.9 EN IEC 62841-3-9:2020 Electric motor-operated hand-held tools, transportable tools and lawn and garden machinery - Safety - Part 3-9: Particular requirements for transportable mitre saws Annex AG no
2
E38.9 EN 62841-3-9:2015 Electric motor-operated hand-held tools, transportable tools and lawn and garden machinery - Safety - Part 3-9: Particular requirements for transportable mitre saws Annex AG no
2
E38.11 EN 61029-2-11:2012 Safety of transportable motor-operated electric tools - Part 2-11: Particular requirements for combined mitre and bench saws Annex AG no
2
E39.1 EN 61951-1:2017 Secondary cells and batteries containing alkaline or other non-acid electrolytes - Secondary sealed cells and batteries for portable applications - Part 1: Nickel-cadmium Annex AH
See notes for Item 39.2
E39.2 EN 61951-2:2017 Secondary cells and batteries containing alkaline or other non acid electrolytes - Secondary sealed cells and batteries for portable applications - Part 2: Nickel-metal hydride Annex AH
See notes for Item 39.2
E39.3 EN 61960-3:2017 Secondary cells and batteries containing alkaline or other non-acid electrolytes - Secondary lithium cells and batteries for portable applications - Part 3: Prismatic and cylindrical lithium secondary cells, and batteries made from them Annex AH
See notes for Item 39.3
E39.4 EN 62133-1:2017 Secondary cells and batteries containing alkaline or other non-acid electrolytes - Safety requirements for portable sealed secondary cells, and for batteries made from them, for use in portable applications - Part 1: Nickel systems Annex AH
See notes for Item 39.4
E39.5 EN 62133-2:2017 Secondary cells and batteries containing alkaline or other non-acid electrolytes - Safety requirements for portable sealed secondary cells, and for batteries made from them, for use in portable applications - Part 2: Lithium systems Annex AH
See notes for Item 39.5
E39.6 EN IEC 62619:2022 Secondary cells and batteries containing alkaline or other non-acid electrolytes - Safety requirements for secondary lithium cells and batteries, for use in industrial applications Annex AH no
See notes for Item 39.6
1
E39.6 EN 62619:2017 Secondary cells and batteries containing alkaline or other non-acid electrolytes - Safety requirements for secondary lithium cells and batteries, for use in industrial applications Annex AH no
See notes for Item 39.6
1
E39.7 EN 62620:2015 Secondary cells and batteries containing alkaline or other non-acid electrolytes - Secondary lithium cells and batteries for use in industrial applications Annex AH no
See notes for Item 39.7
1
E39.8 ERS 001 Li-ion batteries for emergency lighting Annex AH
See notes for Item 39.8
1
E40 EN IEC 60799:2021 Electrical accessories - Cord sets and interconnection cord sets Annex AI
See notes for Item 40
2
E40 EN 60799:1998 Electrical accessories - Cord sets and interconnection cord sets Annex AI
See notes for Item 40
2
E41 EN IEC 61535:2019 Installation couplers intended for permanent connection in fixed installations Annex AK
2
E41 EN 61535:2009 Installation couplers intended for permanent connection in fixed installations Annex AK
2
E42 EN 62560:2012 Self-ballasted LED-lamps for general lighting services by voltage > 50 V - Safety specifications Annex AL
1
E43.1 EN 60252-1:2011 AC motor capacitors - Part 1: General - Performance, testing and rating - Safety requirements - Guidance for installation and operation Annex AM no
2
E43.2 EN 60252-2:2011 AC motor capacitors - Part 2: Motor start capacitors Annex AM no
2
E44.1 EN 60127-1:2006 Miniature fuses - Part 1: Definitions for miniature fuses and general requirements for miniature fuse-links Annex AN Not for standalone ENEC certification
2
E44.2 EN 60127-2:2014 60127-2:2014 relates to special requirements applicable to cartridge fuse-links for miniature fuses with dimensions measuring 5 mm x 20 mm and 6,3 mm x 32 mm for the protection of electric appliances, electronic equipment and component parts thereof, normally intended for use indoors. Annex AN no
2
E44.3 EN 60127-3:2015 Miniature fuses - Part 3: Sub-miniature fuse-links Annex AN no
2
E44.4 EN 60127-4:2005 Miniature fuses - Part 4: Universal Modular Fuse-links (UMF) - Through-hole and surface mount types Annex AN no
2
E44.6 EN 60127-6:2014 60127-6:2014 is applicable to fuse-holders for miniature cartridge fuse-links according to IEC 60127-2 and sub-miniature fuse-links according to IEC 60127-3 for the protection of electric appliances, electronic equipment and component parts thereof, normally intended for use indoors. Annex AN no
2
E44.7 EN 60127-7:2016 Miniature fuses - Part 7: Miniature fuse-links for special applications Annex AN no
2
E45.1 EN 61810-1:2015 Electromechanical elementary relays Annex AO no
2
E46 EN 50131-1:2006 Alarm systems - Intrusion and hold-up systems - Part 1: System requirements Annex AP
2
E46.2 EN 50131-2-2:2017 Alarm systems - Intrusion and hold-up systems - Part 2-2: Intrusion detectors - Passive infrared detectors Annex AP no
2
E46.2 EN 50131-2-2:2021 Requirements for passive infrared detectors Annex AP NO
2
E46.3 EN 50131-2-3:2008 Alarm systems - Intrusion and hold-up systems - Part 2-3: Requirements for microwave detectors Annex AP no
2
E46.3 EN 50131-2-3:2021 Requirements for microwave detectors Annex AP no
2
E46.4 EN 50131-2-4:2008 Alarm systems - Intrusion and hold-up systems - Part 2-4: Requirements for combined passive infrared and microwave detectors Annex AP no
2
E46.4 EN 50131-2-4:2020 Alarm systems - Intrusion and hold-up systems - Part 2-4:Requirements for combined passive infrared and microwave detectors Annex AP
2
E46.6 EN 50131-2-6:2008 Alarm systems - Intrusion and hold-up systems - Part 2-6: Opening contacts (magnetic) Annex AP no
2
E46.7 EN 50131-2-7-1:2012 Alarm systems - Intrusion and hold-up systems - Part 2-7-1: Intrusion detectors - Glass break detectors (acoustic) Annex AP no
2
E46.8 EN 50131-2-7-2:2012 Alarm systems - Intrusion and hold-up systems - Part 2-7-2: Intrusion detectors - Glass break detectors (passive) Annex AP no
2
E46.9 EN 50131-2-7-3:2012 Alarm systems - Intrusion and hold-up systems - Part 2-7-3: Intrusion detectors - Glass break detectors (active) Annex AP no
2
E47 EN 50136-1:2012 Alarm systems - Alarm transmission systems and equipment - Part 1: General requirements for alarm transmission systems Annex AQ no
2
E47.1 EN 50136-2:2013 Alarm systems - Alarm transmission systems and equipment - Part 2: Requirements for Supervised Premises Transceiver (SPT) Annex AQ no
2
E47.5 EN 50131-4:2019 Warning devices Annex AQ no
2
E47.6 EN 50131-5-3:2017 Alarm systems - Intrusion systems - Part 5-3: Requirements for interconnections equipment using radio frequency techniques Annex AQ
2
E47.7 EN 50134-5:2004 Alarm systems - Social alarm systems - Part 5: Interconnections and communications Annex AQ no
2
E47.7 EN 50134-5:2021 Alarm systems - Social alarm systems - Part 5: Interconnections and communications Annex AQ no
2
E48.3 EN 50131-3:2009 Alarm systems - Intrusion and hold-up systems - Part 3: Control and indicating equipment Annex AR no
2
E48.6 EN 50131-6:2017 Alarm systems - Intrusion and hold-up systems - Part 6: Power supplies Annex AR
2
E48.7 EN 50134-3:2012 Alarm systems - Social alarm systems - Part 3: Local unit and controller Annex AR no
2
E49.7 EN 60839-11-2:2015 Alarm and electronic security systems - Part 11-2: Electronic access control systems - Application guidelines Annex AS no
2
E49.11 EN 60839-11-1:2013 Alarm and electronic security systems - Part 11-1: Electronic access control systems - System and components requirements Annex AS no
2
E50 EN 62776:2015 Double-capped LED lamps designed to retrofit linear fluorescent lamps - Safety specifications Annex AT
See notes for Item 50
1
E51 EN IEC 62368-1:2020 Audio/video, information and communication technology equipment - Part 1: Safety requirements Annex AU
2
E51 EN 62368-1:2014 Audio/video, information and communication technology equipment Annex AU
2
E60.1 EN IEC 60947-1:2021 Low-voltage switchgear and controlgear - Part 1: General rules Annex AV No
2
E60.1 EN 60947-1:2007 Low-voltage switchgear and controlgear - Part 1: General rules Annex AV No
2
E60.7.4 EN IEC 60947-7-4:2019 Low-voltage switchgear and controlgear - Part 7-4: Ancillary equipment - PCB terminal blocks for copper conductors Note: To be used in conjunction with EN 60947-1 Annex AV no
2
E60.7.1 EN 60947-7-1:2009 Low-voltage switchgear and controlgear - Part 7-1: Ancillary equipment - Terminal blocks for copper conductors Annex AY
E60.7.2 EN 60947-7-2:2009 Low-voltage switchgear and controlgear - Part 7-2: Ancillary equipment - Protective conductor terminal blocks for copper conductors Annex AY
E60.7.3 EN 60947-7-3:2009 Low-voltage switchgear and controlgear - Part 7-3: Ancillary equipment - Safety requirements for fuse terminal Annex AY
E61 EN 61984:2009 Connectors - Safety requirements and tests Annex AW
E62.11 EN 61643-11:2012 Low-voltage surge protective devices - Part 11: Surge protective devices connected to low-voltage power systems - Requirements and test methods Annex AX
E63.2 EN IEC 61051-1:2018 Part 1: Generic specification Annex BI no
2
E63.2 EN IEC 61051-2:2021 Part 2: Sectional specification for surge suppression varistors Annex BI no
2
E64.1 EN 60269-1:2007 Low-voltage fuses - Part 1: General requirements Annex BC
E64.4 EN 60269-4:2009 Low-voltage fuses - Part 4: Supplementary requirements for fuse-links for the protection of semiconductor devices Annex BC
E64.6 EN 60269-6:2011 Annex BC
E65 EN IEC 61643-331:2018 Components for low-voltage surge protective devices - Part 331: Performance requirements and test methods for metal oxide varistors (MOV) Annex BH
E65 EN IEC 61643-331:2020 Components for low-voltage surge protection - Part 331: Performance requirements and test methods for metal oxide varistors (MOV) Annex BH
E70.1 EN 61010-1:2010 Safety requirements for electrical equipment for measurement, control, and laboratory use - Part 1: General requirements Annex BA
E70.2.10 EN IEC 61010-2-010:2020 Safety requirements for electrical equipment for measurement, control and laboratory use - Part 2-010: Particular requirements for laboratory equipment for the heating of materials Annex BE
E70.2.32 EN IEC 61010-2-032:2021 Particular requirements for hand-held and hand-manipulated current sensors for electrical test and measurement Annex BF
E70.2.33 EN IEC 61010-2-033:2021 Safety requirements for electrical equipment for measurement, control, and laboratory use - Part 2-033: Particular requirements for hand-held multimeters for domestic and professional use, capable of measuring mains voltage Annex BE
E70.2.81 EN IEC 61010-2-081:2020 Safety requirements for electrical equipment for measurement, control and laboratory use - Part 2-081: Particular requirements for automatic and semi-automatic laboratory equipment for analysis and other purposes Annex BE
E70.2.201 EN IEC 61010-2-201:2018 Electrical equipment for measurement, control, and laboratory use - Part 2-201: Particular requirements for control equipment Annex BB
E70.2.10 EN 61010-2-010:2014 61010-2-010:2014 specifies safety requirements for electrically powered laboratory equipment for the heating of materials, where the heating of materials is one of the functions of the equipment. Annex BE
E70.2.20 EN 61010-2-020:2017 Electrical equipment for measurement, control, and laboratory use - Part 2-020: Particular requirements for laboratory centrifuges Annex BE
E70.2.32 EN 61010-2-032:2012 Safety requirements for electrical equipment for measurement, control, and laboratory use - Part 2-032: Particular requirements for hand-held and hand-manipulated current sensors for electrical test and measurement Annex BF
E70.2.33 EN 61010-2-033:2012 Safety requirements for electrical equipment for measurement, control, and laboratory use - Part 2-033: Particular requirements for hand-held multimeters and other meters, for domestic and professional use, capable of measuring mains voltage Annex BE
E70.2.81 EN 61010-2-081:2015 Safety requirements for electrical equipment for measurement, control and laboratory use - Part 2-081: Particular requirements for automatic and semi-automatic laboratory equipment for analysis and other purposes Annex BE
E70.2.101 EN 61010-2-101:2017 Electrical equipment for measurement, control and laboratory use - Part 2-101: Particular requirements for in vitro diagnostic (IVD) medical equipment Annex BE
E70.2.201 EN 61010-2-201:2013 Safety requirements for electrical equipment for measurement, control and laboratory use - Part 2-201: Particular requirements for control equipment Annex BB
E71 EN 60691:2016 Thermal-links Annex BD
E72 EN IEC 62485-2:2018 Safety requirements for secondary batteries and battery installations - Part 2: Stationary batteries Annex BG
E72 EN 50171:2001 Central power supply systems Annex BG
1
E72 EN 50171:2021 Central safety power supply systems Annex BG
1
E73 EN 62262:2002 Degrees of protection (IK code) None
See notes for Item 73

List of limitations

Item 1 Item 1: EN 60598-1 – Luminaires

- clause 2.2 Class 0 luminaires are not in the scope of the Agreement;

- clause 3.2 For luminaires to be connected directly to the supply the rated voltage shall be 230 V or a range
including 230 V.

- clause 3.3 The Certification Body, granting the licence, shall check the correct wording of the mounting
instructions, if any, in a language acceptable to it. The manufacturer shall take care of the correct
wording in other required languages (with or without assistance of the Certification Body).

- clause 5.2.1 Luminaires provided with a plug shall be equipped with one of the following types
IEC 83
- class I: luminaires - Standard sheets: C4
- class II: luminaires - Standard sheets: C5*, C6
*) Identical to EN 50075
Luminaires for use in Great Britain:
IEC 83
- Class I: Standard sheets: B1, B2

GENERAL NOTE: For Class I luminaires the plug may be in accordance with the National Standard Sheet of the country to which the luminaire will be marketed.

- clause 5.2.2 Flexible cables and cords with PVC insulation are not accepted on luminaires intended for use outdoors.

EN 60598-series- the IK rating can be indicated in the ENEC Certificate provided that the latter complies with the EN
62262/IEC TR 62696 standard for a given IK rating.

Certification Bodies shall obtain proof that a test has been carried out according to EN 62262/IEC TR 62696 and verify
that the indicated IK rating is correct;

Note: IK rating on the nameplate is allowed, even if not covered by the ENEC certificate.
Item 1.22 EN 60598-2-22 - Luminaires for emergency lighting

- Spain: Special national conditions for Spain, as indicated in annex ZB to EN 60598-2-22 (see corrigendum of October 2007).
Any luminaire for emergency lighting intended to be marketed in Spain shall carry a warning (e.g. in the instruction sheet) stating either,
* when checked satisfactorily to the above mentioned national conditions:
«Este aparato cumple con los requisitos adicionales para los locales de publica concurrencia en Espana»
(«This appliance has been checked satisfactorily to the additional regulatory requirements for public buildings areas in Spain»)
* when not checked to the above mentioned national conditions:
En este aparato no se han comprobado los requisitos adicionales para los locales de publica concurrencia en Espana»
(«This appliance has not been checked to the additional regulatory requirements for public buildings areas in Spain»)
Item 15 EN 60570 - Electrical supply track systems for luminaires

- clause 4.3 Track-systems shall exist of at least a track, supply connector, coupler and adapter.
- clause 4.3 All components according to the manufacturers catalogue shall be subject to testing.
- clause 4.3 Adapters, provided with socket outlets are not accepted, as the track-system is only intended for connection of luminaires.
- clause 4.3 Multi-adapters as a single component are excluded from the ENEC mark, as the adapter manufacturer can not control the dimensions of the essential parts of the third party track.

- clause 5 The catalogue shall not include any information about the use of the track-system or adaptor that is not controlled by the licensee.
- clause 5 ENEC mark is only allowed on the tracks or the supply connectors. ENEC mark on the single adapter is not allowed.

- clause 5.5 Warnings according to sub clauses 5.5 and 5.6 respectively shall be given either on the track-system or the mounting instructions, delivered with the track-system.
NOTE: Adapter interface components, not forming a fixed part with the luminaire can be accepted for ENEC mark if all relevant requirements of EN 60598-1 are fulfilled.
Special attention is given to the fact that adapter interface components are not covered by EN 60570 and the luminaire standard EN 60598-1 does not give a defined testing program for these products.
Item 21 EN 60730-1: to be used in conjunction with the appropriate Par 2 for a particular type of control, or for controls for particular applications. Part 1 may also by applied, so far as reasonable, to controls not mentioned in a Part 2, and to controls designed on new principles, in which cases additional requirements may be considered to be necessary.
Item 24 EN 60998-1 - Connecting devices for low voltage circuits for household and similar purposes.
Part 1: General requirements

EN 60998-2-1, 2 and 3 - Connecting devices for low voltage circuits for household and similar purposes.
Part 2: Particular requirements

Scope: For components intended to be used only in appliances
Item 25 EN 60999-1 - Connecting devices - Electrical copper conductors

To be used only as an accessory to EN 60998
Item 29 EN 50075 - Flat non-rewirable two-pole plugs, 2,5 A 250 V, with cord.

Any appliance fitted with a Europlug and intended for use in the UK shall carry a warning label stating:
«Within the UK, this appliance may only be used when supplied from a shaver supply unit in accordance with EN 61558-2-5 and must not to be connected to a UK mains socket.»
Item 33 EN 60335 - Household and similar electrical appliances

Limitations due to Special National Conditions and A-deviations as given in the respective standard apply.
Item 34 EN 60065 - (obsolete standard) Audio, video and similar electronic apparatus - Safety requirements

Limitations due to Special National Conditions and A-deviations as given in the standard apply.
Item 39.1 EN 61951-1clause 8: a EN 61959 test report of a ENEC laboratory need to be available clause 9 a EN 62133-1 test report of a ENEC laboratory need to be available
GENERAL NOTE: performance, safety and mechanical requirement for normal handling and application
Item 39.2 EN 61951-2 clause 8: a EN 61959 test report of a ENEC laboratory need to be available clause 9 a EN 62133-1 test report of a ENEC laboratory need to be available
GENERAL NOTE: performance, safety and mechanical requirement for normal handling and application
Item 39.3 EN 61960-3 clause 1: a EN 61959 test report of a ENEC laboratory need to be available clause 1 a EN 62133-2 test report of a ENEC laboratory not older than 1 years need to be available
GENERAL NOTE: performance, safety and mechanical requirement for normal handling and application
Item 39.4 EN 62133-1 clause 5.6,6. If investigating battery packs than cells can be either already ENEC certified or should be tested with the battery pack.
It is allowed to state conformity to EN 61959 on the certificate if it has been tested within the ENEC laboratory
GENERAL NOTE: safety and mechanical requirement for normal handling and application
Item 39.5 EN 62133-2 clause 5.6,6. If investigating battery packs than cells can be either already ENEC certified or should be tested with the battery pack.
It is allowed to state conformity to EN 61959 on the certificate if it has been tested within the ENEC laboratory
GENERAL NOTE: safety and mechanical requirement for normal handling and application
Item 39.6 EN 62620 can only be certified in combination with either the safety standard EN 62133-2 or EN 62619
For cells which are used in batteries for emergency lighting a EN 62133-2 test report of a ENEC laboratory not older than 1 years need to be available.
For cells and batteries for industrial applications a EN 62619 test report of a ENEC laboratory not older than 1 years need to be available.
Item 39.7 EN 62619 clause 5.6. If investigating battery packs than cells can be either already ENEC certified or should be tested with the battery pack.
Item 39.8 Requirement to section ERS 001 section 2.1: if investigating battery packs, than cells can be either already ENEC certified or should be a test report available of an ENEC laboratory according to the standards EN 62133-2:2017 and EN 62620:2015 latest amendments.
Item 40 EN 60799 - For cord sets, restricted to plug according to EN 50075 with a nominal current of 2.5A
Item 50 EN 62776 - The lamp manufacturer shall put the following sentence in the instruction of use:
“Compatibility of this lamp with the luminaire shall be checked with the luminaire manufacturer”
Item 73 EN 62262 cannot be used as a standalone standard for ENEC certification purposes but used in combination with the safety standard of the product in question and be indicated in the ENEC certificate.
In case of luminaires, to be used in conjunction with IEC TR 62696
P Only products bearing the ENEC mark are eligible to the ENEC+ Mark